Presented here on the Panzer Parade are a range of large scale remote control tanks, 1/6th and 1/8th scale.
The hulls are constructed of high density GRP fibreglass between 3 and 6mm thick
for maximum strength and light weight/ The wheels are
all duralumium Suspension beams are hardened steel with coil sprung suspension. The
Gearbox case is cast aluminium. Gears are of Thermo Treated steel. There are over
70 bearings in each Tank. The performance of these Tanks needs to be seen to be
believed being very powerful and robust. Maintenance is minimal. The tracks are a
Zinc/Aluminium cast construction, with hard steel pins. Performance is 3 to 5 mph
depending on gearing choice, climbing 60-degree slopes with ease, and an 19cm wall.
Will ford water up to 35cm, with waterproof electronics.
The gearbox design uses cast aluminium, with 16 thermo treated steel strait
cut gears of various sizes all running on steel shafts in ball raced bearings. This
is fully enclosed and water and dirt proof.
All the sprockets have replaceable bronze teeth, and all the wheels are made from cast
aluminium.
The suspension uses steel shafts all mounted on ball bearings with coil spring
suspension which is adjustable for height and strength. The idlers wheels are
adjustable for optimum track tension.
These remote control vehicles use 2 x 110w 12v Electric multi pole motors that can provide enough power even
at slow speeds to enable the 70 kg 1/6th tanks to do neutral
turns in the most difficult of off road conditions.
Mark from Mark I Tank
Mark I Tanks
Alex Shlakhter
tanks@interdacom.ru
Panzer Parade is one of the few distributors for these tanks, but is not a manufacturer, it is recommended
that if you are interested in one of these vehicles to please contact us and we will provide you with all the neccessary information to help with your decision.
Tanks are custom made and there is a time delay of 3 to 4 weeks from the the placement of an order, this time does not include shipping.
